65HRC 4 Flutes Flat End Mill

This 65HRC 4 flutes flat end mill is available in various sizes from 1mm to 20mm. We use the highest quality high-speed steel on the market as its raw material, just to prolong the service life of the product and reduce the need for frequent replacement. The four grooves are designed to smooth the cutting edges of this milling cutter, giving the final product a clean finish. At the same time, this design ensures optimum chip removal and reduces the risk of accidents. After a special hardening process, the hardness of this milling cutter reaches 65 HRC so it can effectively improve processing efficiency and reliability. Compared with the same type of products on the market, our milling cutters can cut various types of materials such as steel, aluminum, stainless steel, high-temperature alloys, etc., without frequent replacement. If you want to buy, please contact us now to learn more about this product.

Product advantages

1. The hardness of 65HRC makes this 65HRC 4 flutes flat end mill well able to cope with high-strength and high-speed milling work.

2. This milling adopts nano-coating technology, which makes the surface of the cutter smoother and harder, and has the advantages of anti-wear and anti-reflection.

3. The overall hard high-speed steel material can effectively prevent the grain boundary separation of the cutting edge, and at the same time extend the service life of the cutting tool.

4. The 4-flute design can provide better chip discharge effect, improve process efficiency and reduce equipment loss.

5. This milling is widely used. It is suitable for cutting non-ferrous metals such as aluminum, brass and copper, as well as various plastics and wood.

Spotlight Exhibits

Factory

Product Description

65HRC 4 Flutes Solid Carbide Square Endmills with Nano Coating

SPECIFICATION	d1	L1	D	L
D1*3*D4*50L	1mm	3mm	4mm	50mm
D1.5*4.5*D4*50L	1.5mm	4.5mm	4mm	50mm
D2*6*D4*50L	2mm	6mm	4mm	50mm
D2.5*7.5*D4*50L	2.5mm	7.5mm	4mm	50mm
D3*9*D4*50L	3mm	9mm	4mm	50mm
D3.5*10*D4*50L	3.5mm	10mm	4mm	50mm
D4*12*D4*50L	4mm	12mm	4mm	50mm
D4*16*D4*75L	4mm	16mm	4mm	75mm
D4*20*D4*100L	4mm	20mm	4mm	100mm
D5*15*D5*50L	5mm	15mm	5mm	50mm
D5*20*D5*75L	5mm	20mm	5mm	75mm
D5*25*D5*100L	5mm	25mm	5mm	100mm
D6*18*D6*50L	6mm	18mm	6mm	50mm
D6*24*D6*75L	6mm	24mm	6mm	75mm
D6*30*D6*100L	6mm	30mm	6mm	100mm
D8*24*D8*60L	8mm	24mm	8mm	60mm
D8*30*D8*75L	8mm	30mm	8mm	75mm
D8*35*D8*100L	8mm	35mm	8mm	100mm
D10*30*D10*75L	10mm	30mm	10mm	75mm
D10*45*D10*100L	10mm	45mm	10mm	100mm
D12*35*D12*75L	12mm	35mm	12mm	75mm
D12*45*D12*100L	12mm	45mm	12mm	100mm
D14*45*D14*100L	14mm	45mm	14mm	100mm
D16*45*D16*100L	16mm	45mm	16mm	100mm
D18*45*D18*100L	18mm	45mm	18mm	100mm
D20*45*D20*100L	20mm	45mm	20mm	100mm
D6*45*D6*150L	6mm	45mm	6mm	150mm
D8*50*D8*150L	8mm	50mm	8mm	150mm
D10*60*D10*150L	10mm	60mm	10mm	150mm
D12*60*D12*150L	12mm	60mm	12mm	150mm
D14*70*D14*150L	14mm	70mm	14mm	150mm
D16*75*D16*150L	16mm	75mm	16mm	150mm
D18*75*D18*150L	18mm	75mm	18mm	150mm
D20*75*D20*150L	20mm	75mm	20mm	150mm

Tolerances
Flute Diameter	Flute Diameter Tolerance	Shank Diameter Tolerance
Φ1.0-Φ2.9	0～-0.02	H6
Φ3-Φ6	-0.01～-0.03
Φ6-Φ10	-0.01～-0.035
Φ10.0-Φ18.0	-0.01～-0.04
Φ18.0-Φ20.0	-0.015～-0.045

Application
Carbon Steel Alloy Steel	Pre-harden steel	High-hardened				Stainless Steel	Copper Alloy	Aluminum Alloy
	45HRC	50HRC	55HRC	60HRC	65HRC
○	○	√	√			○	○	○

Recommended Parameters

Material	Carbon Steel, Alloy Steel, S45C, FC, FCD, SCM, S50C, SKS...		Alloy Steel, Tool Steel SCR, SNCM, SKD11, SKD61.NAK80		Hard Steel, SKD11
Hardness	HRC30		HRC50		HRC60
Diameter	Cutting speed(VC) (mm-1)	Feed(F) (mm-min)	Cutting speed(VC) (mm-1)	Feed(F) (mm-min)	Cutting speed(VC) (mm-1)	Feed(F) (mm-min)
1mm	22000	400	18000	200	9000	140
1.5mm	12000	500	11000	280	5200	150
2mm	10000	550	10000	280	4600	170
3mm	9000	600	5500	310	3500	220
4mm	6000	750	5000	400	2200	220
5mm	4800	800	4000	400	1700	240
6mm	4500	820	3800	420	1600	300
8mm	3500	820	2800	420	1000	300
10mm	3000	820	1800	420	900	300
12mm	2000	820	1600	350	800	300
16mm	1500	650	1000	300	500	150
20mm	1200	650	900	300	400	150

Raw Material List

Grade	ISO Code	Chemical Compositions（%）		Grain Size(um)	Physial Mechanical Properites(≥)			Coating
		Wc	Co		Density(g/cm3)	Hardness (HRA)	T.R.S(N/mm2)
YG10X(50HRC)	K30-K40	89	10	0.8	14.43	91.5	2500	TISIN
UF12U(55HRC)	K40	87	12	0.6	14.15	92.3	3900	TISIN
AF501(60HRC)	K05-K10	89	10	0.4	14.1	92.8	3600	NANO BLACK
AF308(65HRC)	K05-K10	91	8	0.3	14	93.8	3800	NANO (BLUE)

Detailed Photos

4 Flutes square Carbide milling cutter	4 Flutes square Carbide cutter	4 Flutes square end mill

Our Advantages

1. Product quality control and delivery time is strictly controlled;

2. Direct manufacturing factory offering competitive price;

3. All the inquiries will be replied within 12 hours;

4. OEM & ODM service are available;

5. Providing first-class after-sales services to the customers.

Packaging

FAQ

1. Q: Is your price competitive?

A: Only good quality machine we supply. Surely we will give you best factory price based on

superior product and service.

2. Q: why choose us?

A: We are one of High-tech Enterprises, AAA Contract and Trustworthy Enterprises, AAA Technology Consulting Firm.

3. Q: Features for Steel Platform with Plastic coating finish?

A: Color Plastic Spraying on platform surface with comptitive price compared with the aluminum alloy and hot dip gavalnized surface.Hot dip galvanized steel platform with good Anti corrosion and Lower price than Aluminum alloy platform.

4. Q: How is your price level?

A: Factory direct sale, we have whole production line work process from platform to main parts.

5. Q: What payment terms do you accept?

A: T/T or L/C or West Union or Moneygram or Paypal,others is welcome.

http://www.best-gr8.net/