Technical Parameter
Item | Specifications |
Step Angle Accuracy | ±5% |
Resistance Accuracy | ±10% |
Inductance Accuracy | ±20% |
 Temperature Rise | 80K Max. |
Ambient Temperature | -20℃~+50℃ |
Insulation Resistance | 100MΩMin.@ 500VDC |
Dielectric strength | One minute@500VAC∙5mA Max. |
Shaft Radial Play | 0.06Max.@450g |
Shaft Axial Play | 0.08Max.@450g |
Â
Technical Specification
Model No. | Polar | Rated | Current/ | Resistance/ | Inductance/ | Holding | # of | Rotor | Weight | Length | |
35H033HM-0406 | Unipolar | V | A | Ω | mH | oz-in | kgf · cm | 6 | g∙ cm2 | kg | mm |
10 | 0.4 | 25 | 20 | 15.2 | 1.1 | 14 | 0.17 | 33 |
Â
Mechanical Dimension                                 Â
Â
Pull Out Torque Curve
FAQ
Q: Is there the products tested before shipping?
A: All of our motors will be 100%QC before shipping.
Â
Q: What are the common problems faced when using NEMA 14Â stepper motors?
A: Common problems include missed steps, resonance, overheating, inadequate torque, and electrical noise interference.
Â
Q: Can I run the NEMA 14 stepper motor at high speeds?
A: Running a stepper motor at high speeds can be challenging due to torque drop-off, rotor inertia, and other limitations. High-speed operation may require careful motor selection and optimized control parameters.
Â
Q: Are there any safety considerations when using NEMA 14 stepper motors?
A: Safety considerations include proper electrical wiring and grounding, heat dissipation, mechanical hazards, and adhering to the guidelines for safe operation.
http://www.sitmotors.com/